HPB Turbocharger Standard Model
HPB Turbocharger Standard Model
HPB Turbocharger Cutaway View
HPB Turbocharger Cutaway View
Smallest Model HPB Turbocharger HPB-10
HP-HEMI Motorized Turbocharger Side View
Largest Model HPB Turbocharger HPB-2800
Largest Model HPB Turbocharger HPB-2800

HPB Turbocharger

Capture pressure from a secondary flow to boost a primary high-pressure feed flow. Our equipment provides the lowest cost permeate.

Quote for new equipment

Quote for parts or replacement

Why use a Turbocharger?
  • Proven from small-scale and containerized units, to mega-scale utility desalination
  • Simplest stand-alone Energy Recovery Device
  • Lowest capital and installation costs and lowest maintenance
  • Reduces the capital and operating cost of the High Pressure pump and motor
  • Using multiple turbochargers in a BiTurboTM configuration enables optimal membrane performance.
Interstage booster at a mid-sized BWRO facility
Interstage boosting for BWRO
Ras al Khair, Saudi Arabia: 300,000 m3/d
Ras al Khair, Saudi Arabia: 300,000 m3/d
HPB Turbocharger Standard Model
HPB Turbocharger Standard Model
HPB Turbocharger Cutaway View
HPB Turbocharger Cutaway View
Smallest Model HPB Turbocharger HPB-10
HP-HEMI Motorized Turbocharger Side View
Why choose a FEDCO HPB Turbo?
  • CFD (Computational Fluid Dynamics) analysis is used to fine tune the HPB to your needs
  • Industry-leading three (3) year limited warranty 
  • Super Duplex SS 2507 is standard MOC
  • Custom built to your flow and pressure specifications in 3 to 6 weeks
Get a quote
Description
Standard HPB Series

HPB-10-350 Flow Rates

With ten (10) models, there is a perfect fit for your most demanding performance, reliability and project schedule requirements. Standard MOC is Duplex SS 2205, however, Super Duplex SS 2507 is optional. Brine nozzle valve actuators, flanged connections and other options are available. Delivery of the standard line HPBs are built to your flows and pressures specifications in three (3) to (6) weeks in Duplex SS 2205. HPB-cutaway-features

  1. Variable area in nozzle (needle type for precise control)
  2. Nameplate
  3. Thrust bearing – patent pending design, allows dry running
  4. Brine nozzle and volute
  5. Brine (turbine) impeller
  6. Rotor shaft
  7. Center bearing — lubricated by feed, ZERO brine leakage to feed
  8. Feed (pump) impeller
  9. End cap
  10. Multi-vane diffuser — radial pressure balanced for long wear ring and bearing
  11. Mounting foot (varies by model)
  12. O-rings — all bearings mounted on o-rings for easy removal
  13. Victaulic-type pipe joints (flanged joint optional)
  14. Standard Duplex SS 2205 MOC (Super Duplex SS 2507 optional)
  15. Can discharge brine at higher pressure for easy brine disposal
Mega System HPB

HPB-250-2800 Flow Rates

 

Six (6) models cover the largest current and anticipated SWRO trains. Standard MOC is Duplex SS 2205 with Super Duplex SS 2507 optional. Brine nozzle valve actuators, flanged connections and other options available.

Options

HPB-options-chart

Please contact Customer Service for Manuals and Drawings.

Specifications
HPB-10
HPB-10-ULTRA
HPB-20
HPB-20-ULTRA
HPB-30
HPB-30-ULTRA
HPB-40
HPB-40-ULTRA
HPB-60
HPB-60-ULTRA
HPB-90
HPB-90-ULTRA
HPB-130
HPB-130-ULTRA
HPB-180
HPB-180-ULTRA
HPB-250
HPB-350
HPB-500
HPB-700
HPB-1000
HPB-1400
HPB-2000
HPB-2800
Ultra High Pressure

FEDCO's HPB Ultra series of UHP Turbochargers are rated for pressures up to 124 bar (1800 psi) – allowing for operation far above the pressure rating of 83 bar (1200 psi) typical for conventional RO equipment.

The HPB Ultra represent the simplest, safest and most reliable UHP RO solution on the market.

The HPB Ultra is available in eight models to meet a range of flow rates from 3 m3/hr to 208 m3/hr, making them suitable for everything from small-scale industrial wastewater treatment to large-scale brine concentration applications.

For detailed information on the HPB Ultra series, refer to product specifications or contact us to find out more.

HPB-Ultra Flow Rates

 
Brochures

Click image to view brochure

HPB Brochure 2021 (5)_Page_1

 

You might also be interested in:
  • BiTurboTM – Optimized two-stage SWRO technology
  • HP-HEMI Turbo – ERD for SWRO systems over 5,000 m3/day
  • LPD Turbine – Electricity generation from low pressure brine flow

FEDCO presents optimized RO approaches at IDA World Congress, Sydney

On October 8-11 the global desalination industry convened in Sydney for the International Desalination Association World Congress. Following delays...

Read More »

MSMT - A Significant Process Improvement for SWRO

Executive Summary Seawater reverse osmosis systems (SWRO) are the mainstay of large-scale desalination systems. Plant designs have settled in a more...

Read More »

FEDCO’s BiTurbo™ SWRO in Rancho San Lucas shortlisted as Desalination Plant of the Year

Vote for Rancho San Lucas for Global Water Award 2020! We are excited to announce that the BiTurbo™ seawater reverse osmosis plant in Rancho San...

Read More »
Get a Quote